S38系列(增量式)旋转编码器 增量式(通用型,实心轴)

详情描述：

S38系列(增量式)旋转编码器 
增量式(通用型,实心轴)
外形尺寸：体积小,外径Φ38mm,厚度为39.5mm,
轴    径：Φ6mm(D形口)
连接方式：线后出和线侧出 
输出形式: 集电极开路、电压、互补和差分输出（长线驱动26LS31）
分 辨 率：可达2500P/R
电源电压：可选①DC5V；②DC8V-24V
防护等级：IP50 & IP65
线　　长：1M（可根据需要适当加长电缆长度，费用另算）
外罩质地：铝
重　　量：约123g(包装状态)
S38 series (incremental type) Rotary encoder
Incremental type (general type, solid shaft)
External dimensions : Small volume, external diameter : Φ38mm, thickness : 39.5mm
shaft diameter : Φ6mm (D-shaped mouth)
Outlet type : wire out from back and wire out from side
Output mode : Collector open circuit output , voltage output , complementary output and difference output (long wire drive 26LS31)
Resolution : up to 2500P/R
Supply voltage : Optional : DC8V-24V
Protection grade : IP50 & IP65
Wire length : 1M (Wire length could be added appropriately by require , but it need payment individually)
Crust : aluminum
Weight : about 123g(with package)